Archive for the ‘Microbiologically Influenced Corrosion’ Category


US EPA PUBLISHES REPORT – CORROSION IN ULTRA LOW SULFUR DIESEL (ULSD) UNDERGROUND STORAGE TANKS (UST).

The US EPA has just released a report of the results of a series of 42 UST inspections that were performed in January and February 2015. Despite the tiny percentage of ULSD UST inspected and sampled, the report highlights the considerable disconnect between observed corrosion (83% of the systems inspected had moderate to severe corrosion) and corrosion awareness (only 25% of site owners were aware of corrosion issues. The report also does a nice job of listing the different ways in which uncontrolled corrosion – particularly microbiologically influenced corrosion (MIC) – can increase operational costs and decrease profitability.
The investigators were able to collect bottoms-water (B-W) samples from only 11 of the 42 inspected UST. The pH of those B-W samples averaged 4.6, which is in the acidic range (neutral pH = 7.0). Moreover, many of the B-W samples contained mixtures of weak organic acids that are characteristic of microbiological activity. Unfortunately, no microbiological testing was included in the study.
The report’s greatest value is in its potential to improve awareness. I recommend that all fuel retail site owners and operators read at least the executive summary. You can find the EPA report at https://www.epa.gov/ust/alternative-fuels-and-underground-storage-tanks-usts#tab-5.
BCA’s Microbial Audit program is unique within the petroleum industry. It provides the total picture of both current and potential MIC risk. For more information visit the Microbiological Audit’s section of BCA’s Services listing (https://biodeterioration-control.com/microbial-testing-services/).

NEW US EPA DOCUMENT – RELEASE DETECTION FOR UNDERGROUND STORAGE TANKS AND PIPING: STRAIGHT TALK ON TANKS

The US EPA’s Office of Underground Storage Tanks has just published a clear and concise document on UST release (leak) detection (https://www.epa.gov/ust/release-detection-underground-storage-tanks-and-piping-straight-talk-tanks). Coincidently, in the past few days, my friend Walt Huysman posted a LinkedIn blog about predictive maintenance (PdM). What’s the connection? UST release detection effectively signals the need to take immediate corrective action. UST replacement and site remediation can easily cost $250,000 to $500,000. PdM is designed to strike a high return on investment (ROI) balance between the costs associated with condition monitoring and preventive maintenance actions, on one hand, and corrective maintenance actions, on the other. Assuming a well-designed and managed program, PdM typically costs a tiny fraction (<1%) of corrective maintenance costs. Microbiologically influenced corrosion (MIC) has been estimated to be responsible for as much as 50% of the economic damage caused to petroleum infrastructure. However, neither the US EPA UST Regulations nor PEI’s RP-900 (UST Inspection and Maintenance) include guidance on PdM for microbial contamination. PdM to include microbial contamination monitoring and control is a high ROI proposition. Prevention of product release is only the tip of the iceberg. To learn more, contact me at fredp@biodeterioration-control.com.

OUR SERVICES

  • Consulting Services
  • Condition Monitoring
  • Microbial Audits
  • Training and Education
  • Biocide Market Opportunity Analysis
  • Antimicrobial Pesticide Selection

REQUEST INFORMATION




    captcha